Approximate WGS84 to OSGB36/ODN transformation
Last updated
Last updated
The following Helmert parameters transform WGS84 (or ETRS89 or ITRS, the differences are negligible here) coordinates to ‘something like’ OSGB36 and ‘something like’ ODN heights. The error is up to 3.5 metres (95%) both horizontally and vertically. This transformation is for use with equation (3). Note the remarks made about Helmert transformations in section 6.2.
tX(m) | tY(m) | tZ(m) | s (ppm) | rX(sec) | rY(sec) | rZ(sec) |
---|---|---|---|---|---|---|
OSGB36 is an inhomogeneous TRF by modern standards. Do not use this transformation for applications requiring better than 3.5 metre (95%) accuracy in the transformation step, either vertically or horizontally. Do not use it for points outside Britain.
OSGB36 does not exist offshore.
- 446.448
+ 125.157
- 542.060
+ 20.4894
- 0.1502
- 0.2470
- 0.8421